Gas cutting equipment for metal

Gas cutting equipment for metal Includes a gas burner, a special pressure regulator, gas cylinders, a mixer, and hoses. The burner heads have a 60° angle of inclination.⁰ or 90⁰, has several nozzles, the central one serves to release oxygen during cutting, the outer ones serve to supply a combustible mixture to heat the surface. Gas cutting equipment for metal It has two cylinders—one containing oxygen and the other containing fuel. The hoses used to deliver the gases, called sleeves, have a diameter of 6-12 mm and are capable of operating at temperatures of 35⁰ WITH.

One of the common ones equipment is The P1-01 hand-held cutting torch has a nozzle with an injector, which generates high pressure for a smooth metal cut. The P2-01 and P3-01 models are more powerful. They differ in nozzle size, operating oxygen pressure in the system, and heating mixture supply pressure. A gas-powered unit is also available for automatic, unattended metal cutting.

Equipment for gas cutting and welding of metal The system includes pressure regulators for compressed gases. Pressure regulators maintain stable gas pressure at the required level. Pressure regulators come in single-chamber and dual-chamber designs. Dual-chamber designs are frost-resistant and operate more reliably and consistently. For safety, the valve on the cylinders has a different design. Equipment for gas cutting and welding of metal Gas reducers are classified as acetylene (BAO-5DM), oxygen (BKO-4DM), and propane (BPO-5DM). Modern equipment includes the Smena-2M, designed for oxygen cutting of sheet steel using propane gas; the Ogonyok, a hinged-cantilever type; and the Orbita, a portable machine that cuts pipes and welds at an angle of 0–40°.⁰ WITH.