In the production of cutting tools, to ensure that they have the required properties: hardness, strength, modern alloys are used, in particular steel P18It is manufactured in accordance with the requirements of the State Standard and is widely used in the production of:

• long, shaped rolled products;
• polished rod and silver;
• calibrated rod;
• stripes.

By following the link http://specmetall.su/r18, every entrepreneur will be able to place an order for the purchase of such steel.

Application of P18 steel

The alloy is classified as a high-speed steel with normal heat resistance because its vanadium content does not exceed 2%. In the current century, this steel is used to produce:

• taps;
• developments;
• milling cutters;
• incisors;
• countersinks;
• drills and other cutting tools.

The chemical composition is quite diverse. The alloy contains Fe, V, Mo, P, Ni, Si, Co, W, Cr, S, Mn, and C. The presence of a large number of elements improves the physical, mechanical, and thermal properties of the steel.

The main advantages of the alloy:

• improved grinding;
• sufficient wear resistance;
• good viscosity;
• low susceptibility to strong overheating during hardening of the material.

It is classified as a tool grade and is therefore known for its strength characteristics up to HRC68-70. It exhibits good wear resistance at extreme temperatures. Excellent resistance to permanent deformation is also noted.

Key characteristics of the alloy

The above-mentioned advantages make this steel widely used in the manufacture of tooling products. Specifically, it increases the wear resistance of cutting edges of cutters, drills, and milling cutters, which positively reduces surface and hole machining time compared to tools made of other alloys. Resistance to high temperatures and mechanical loads during cutting, turning, and drilling of parts and workpieces increases work speed and reduces production time for various products.

The high quality of P18, when used as a cutting tool, is achieved through alloying with vanadium, molybdenum, tungsten, cobalt, and aluminum. Heat treatment (hardening) to temperatures in the range of 1200-1300 degrees Celsius and tempering are used to achieve precipitation hardening.

P18 steel in Moscow Businessmen and representatives of large cutting tool manufacturers are purchasing these products. Interested parties can follow the link. http://specmetall.su/r18 and order the required quantity of alloy.